How do you measure for kitchen backsplash? This is as important as ensuring an excellent backsplash for your kitchen. If you don’t get the measurement right, the whole thing can turn out to be a mess.
This article will show you how to measure correctly a kitchen backsplash and the appropriate measurements needed for a standard kitchen backsplash.
What Do You Need to Measure For Kitchen Backsplash?
The below are required to carry out the measurement.
· Measuring Tape
· Pen or Pencil
· Jotter or notebook
The Step by Step Procedure in Measuring For Kitchen Backsplash
The first thing you have to do is find out the total area of your backsplash in square inches. To get the number, you need to take your measuring tape and measure the height and width of your backsplash. Write down the measurement on a piece of paper and always round up to the nearest whole number.
The step entails calculating the square inches, obtained by simply multiplying the height times the width. If the walls or sections are in multiple facets, you can calculate the area of each separately and add them together at the end. For instance, it is 48″ W x 18″ H. When you multiply it, you get 880 square inches.
48″ x 18″ = 864 square inches
Typically, Tile is sold by the square foot. So you need to find out the total square footage of your backsplash, which will be based on the square inches you just calculated at the previous step. To get the number, simply the calculated square inches by 144.
48” x 18″ = 864/144 = 6” square feet.
I strongly recommend ordering overage; it should be at least 15% extra. 15% of 6 square feet is 0.9, so you round up to 10. So you are to get at least 10 square feet of tile total.
When you are done, you can start placing orders for your tiles.
What is the Right Backsplash Height?
The Height of a standard backsplash is 4 inches from the countertop. You can order for a full backsplash, which can come in any height you want it to, as most homeowners have it all the way high to the Height of the kitchen cabinets. However, these are not without pros and cons.
Pros of a Standard Kitchen Backsplash Height
A Standard backsplash is measured 4 inches on a normal basis. However, you can make them taller. You can even double the Height up to 8 inches. This simply means you have total control over how you want your backsplash to look.
Standard backsplashes are more cost-effective because of the materials. Going for a standard kitchen backsplash means you are using fewer materials, and using fewer materials means you are saving money. However, this is important if you are going to be using an expensive countertop material. If you are having a hard time getting tiles to match your countertops, you can go for a standard kitchen backsplash.
The fewer the materials used for a kitchen backsplash, the more eco-friendly and lasting your kitchen will be. A standard backsplash is one factor that shouldn’t be neglected during a kitchen remodel.
Using a smaller backsplash, it is easier to switch colors and spice the kitchen up colorfully. You can easily use different patterns and shades, which may not be fully possible using a full backsplash.
Pros of a Standard Full Backsplash
If you want a more colorful outlook in your kitchen, the full-size backsplash is the way to go. This helps to add color, depth, and dimension to your kitchen. In addition, it offers you a lot of options that you can use to beautify your kitchen.
Full-size backsplashes serve as an extra layer of protection to your wall. Apart from adding coloring, they protect the kitchen wall from damage and staining caused by cooking streams or moisture. The best part is that it can easily be cleaned when stained, leaving you a stainless kitchen.
When you use a full backsplash, you are making your kitchen look tidy and complete. A full-size backsplash helps tie the whole room together and provides an easy transition from the countertop to the cabinets. It is simply a wonderful size to behold when you enter the kitchen.
Cons of a Standard Full Backsplash
It is expensive to have a full black splash. So be ready to spend a good amount of money.
How Much Does It Cost To Add A Kitchen Backsplash?
There is no stated amount to that. The cost of having a backsplash in your kitchen is completely dependent on the compilation of certain factors. The factors include;
· The type of material
· The amount of material
· The amount of time used for the installation,
· Cost of labor
What Is The Size Of A Typical Backsplash?
In a standard modern kitchen, it is required that there is a space of 18″ between the counter and overhead cabinets. So you can install a backsplash between 4-17 ⅞ “tall. However, this is subjected to individual preference.
What Are The Most Popular Materials Used For A Backsplash?
Which Type Of Backsplash Tile Requires The Least Amount Of Maintenance?
When you are going for a backsplash that does not require special or too much care, I suggest you go for a backsplash made of tiles, ceramic, glass, or porcelain. You just need a soft soap and a small towel to keep these surfaces clean, and you are good to go.
How Much Space Should Be Left Between The Backsplash And The Countertop?
Frequently Asked Questions (FAQs)
How much extra tile should I buy for the backsplash?
The general rule states that at least 15% of the square feet should be extra. For example, if your square feet are 6″. All you have to do is get the 15% of 6″, which will give you 0.9″, round it up to 10″. Then, you are done!
This is how you calculate to know the extra tile you need to get.
What is the most efficient tile size for a backsplash?
Tiles come in sizes, but not all are efficient for a backsplash. The efficient tile size is 4×4, 3×6, and 6×6. For intricate detailing, you are advised to use smaller tiles that can be found in a range between 1×1 and 2×2.
How do you measure for wall backsplash?
To measure a good backsplash, multiply the width and height to get the total area in inches, and then divide by 144 to ascertain the square feet needed. For example, if your space is 48″ W x 18″ H = 864. Next, 864/144 = 6 square feet.
How many sq ft of tile do I need?
To get the right measure of tile, you need; measure the length in feet, and measure the width in feet. This is gotten by multiplying the number of the length by the width. This will give you the total square footage for that part of your project. Do this to get the right measurement for all parts of the space that will get the same tile.
Should kitchen backsplash be installed before countertop?
Typically, a countertop is installed before the backsplash is installed on the walls. This is because the backsplash is placed above the countertop.
Is peel and stick backsplash worth it?
Though it is cost-effective, you prefer to go for a high-quality peel and stick tile to give your kitchen an authentic look and for improved sustainability. However, the peel and stick backsplash is very durable, but a high-quality one can help stand the hands of time.
Without knowing how to measure a backsplash, you can end up making a mess in the kitchen. So it is necessary for you not just to read but understand.
I hope you loved and found this article interesting. for more informed kitchen nuggets, do check out “What To Put In Kitchen Canisters”.